Engine was running rough, told bad timing....changed out the chains. Would not start, popping in intake.
[1]Thought pulse wheel might be installed wrong,apparently there are many ways to install, depending on engine, year, etc.
Finally found a site which said with crank keyway at 9 O'clock.....pulse wheel gap should point to the crank sensor,(whichever side its located on)
for any duratec....
this also aligned with the YT video was using, does this sound right?
[2] Current symptoms. With...
Duratec 3.0 2005 changed timing chains...now engine chirping, popping, no start
[1]Thought pulse wheel might be installed wrong,apparently there are many ways to install, depending on engine, year, etc.
Finally found a site which said with crank keyway at 9 O'clock.....pulse wheel gap should point to the crank sensor,(whichever side its located on)
for any duratec....
this also aligned with the YT video was using, does this sound right?
[2] Current symptoms. With...
Duratec 3.0 2005 changed timing chains...now engine chirping, popping, no start
